// This is a modem settings file for FirstClass 2.5 and later.
//
// It is for the modem called 'Apple GeoPort Telecom Adaptor'.
// If this is not the modem you are setting up, you may need additional
// modem files. These are available from your administrator or on your
// FirstClass Client disk. Look for a file called Modems ReadMe for details.
//
// To use this modem driver in FirstClass, you must place it inside
// the Modems directory (or folder). The modem driver will then
// appear in the Modem: popup inside the application.
//
// This file was created on Monday, February 26, 1996, from the database
// file called "Modems 2/26/96".
// This database record was last modified on 8/21/95.
// This file was created by version 2.6.1v10 of the database converter.
//
MNAME = 'Apple GeoPort Telecom Adaptor'
MDMATT = '+++'
MDMDIAL = 'ATD%s¥r'
MDMTONE = 'T'
MDMPULSE = 'P'
MDMHUP = 'ATH¥r'
MDMANS = 'ATA¥r'
MDMRESET = 'ATZ¥r'
MDMINIT = 'ATS0=0V1E0X4W1M0&C0&D0¥r'
MDMOPT = 'AT%s¥r'
MDMHWHS = '&K3&Q5N1'
MDMSPKR = 'M1'
MDMCD = '&C1'
MDMDTR = '&D2'
MLTO = 3600
MSTO = 240
MGTO = 60
MDELAY = 90
MBAUD = 9600
MHWHSBAUD = 19200
MAUTOSPEED = 0
MCOMMENTS = 'Requires a HWHS cable for high speed use. Make sure Express Modem control panel is set to 'Use Express Modem'. Do not turn off hardware handshaking.'